Automotive, Safety & Security, Cones & Safety Tape

Page 1 of 59 | next

AO Safety 97351 LED Safety Flare, Orange
by AO Safety (Tools & Hardware)
Model 97351
AO Safety 97351 LED Safety Flare, Orange
Highly visible safety flare with flashing and nonflashing LED mode alert is visible for 2 miles.

AO Safety 97351 LED Safety Flare, Orange

JVCC GLW Glow in the Dark Tape: 1/2 in. x 10 yds. (Luminescent Lime Green)
by JVCC (Misc.)
JVCC GLW Glow in the Dark Tape: 1/2 in. x 10 yds. (Luminescent Lime Green)
JVCC GLW Glow in the Dark Tape is a premium flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around doorframes, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants. JVCC Glow in the Dark Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest ...

JVCC GLW Glow in the Dark Tape: 1/2 in. x 10 yds. (Luminescent Lime Green)

20" Collapsible Traffic - Safety Cone with High-Visibility LED Flasher
by Tooluxe (Misc.)
20
One-year warranty and Jack's Tool Shed worry-free Satisfaction Guarantee.

20" Collapsible Traffic - Safety Cone with High-Visibility LED Flasher

AO Safety 90132 16-Inch Collapsible Safety Cone
by AO Safety (Tools & Hardware)
Model 90132
AO Safety 90132 16-Inch Collapsible Safety Cone
Expands to a full 16-inches in height.; Hi visibility cone with two reflective bands; Folds flat for easy storage in garage or car; Quality, weather resistant construction; Weighted base stays where you place it

AO Safety 90132 16-Inch Collapsible Safety Cone

Police-Style Lighted Traffic Baton - 4 Super-Bright LED
by Able Tooling (Misc.)
Police-Style Lighted Traffic Baton - 4 Super-Bright LED
The professional, safe way to signal and direct drivers for rerouting traffic, parking or hazard alerts. Great for directing overflow traffic at school, church or community events. Positive-action (click-on/click-off) thumb switch prevents accidental activation, preserves battery life. Uses two standard D-batteries (not included), last up to 48 hrs continuous in flash mode. One-year warranty and

Police-Style Lighted Traffic Baton - 4 Super-Bright LED

NEW! 24" Collapsible Traffic - Safety Cone with High-Visibility LED Flasher
by Tooluxe (Misc.)
NEW! 24
This collapsible Traffic Safety Cone stands 24" tall on a stable 12" base when in use, and can be easily collapsed to a mere 2" height for compact storage. The high visibility LED flasher sits on top of the cone, visible from 800 feet, and flashes twice per second for added visibility and security. The base is made with high impact ABS plastic and the cone with super heavy duty oxford nylon that is resistant to elements. Batteries for the LED light are included.

NEW! 24" Collapsible Traffic - Safety Cone with High-Visibility LED Flasher

JVCC GLW Glow in the Dark Tape: 1 in. x 10 yds. (Luminescent Lime Green)
by JVCC (Misc.)
JVCC GLW Glow in the Dark Tape: 1 in. x 10 yds. (Luminescent Lime Green)
JVCC GLW Glow in the Dark Tape is a premium flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around doorframes, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants. JVCC Glow in the Dark Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest ...

JVCC GLW Glow in the Dark Tape: 1 in. x 10 yds. (Luminescent Lime Green)

Barrier Tape, Police Line Yellow
by Allsafe Services and Materials (Misc.)
Barrier Tape, Police Line Yellow
Police Line Yellow barrier tape now in stock. Texas America Safety Company now offers a wide variety of caution, danger, and barricade tape. All versions are in rolls of 1000 feet and can be used both on the construction jobsite, workplace, and even for fun at the home.

Barrier Tape, Police Line Yellow

3/4" FINGER TAPE
by Treeline (Misc.)
3/4
This tape is used in many industrial applications to guard against minor cuts and abrasions and is an excellent item for the woodcarver. It is made from a cotton gauze which has been coated with a latex compound and this tape sticks only to itself. It holds its shape well once formed and can be used to make removable finger guards and tool handle wrappings to increase friction and reduce hand fatigue. This tape has dozens of uses around the home and workshop. Each roll is 3/4" wide and 90 feet long.

3/4" FINGER TAPE

JVCC REF-7 Engineering Grade Reflective Tape: 2 in. x 10 yds. (Silver-White)
by JVCC (Misc.)
JVCC REF-7 Engineering Grade Reflective Tape: 2 in. x 10 yds. (Silver-White)
JVCC REF-7 Engineering Grade Reflective Tape is used for safety applications as well as entertainment industry use as spike tape or "daytime" glow tape. Reflective Tape is primarily designed for permanent and temporary traffic signage and features an enclosed lens retroreflective urethane film coated with a permanent acrylic adhesive. Application surface should be flat (not for unpainted stainless steel surfaces). JVCC REF-7 may be screen printed, guillotine cut, die-cut, or thermal kiss-cut. The adhesive has a dwell time of 24 hours, but reaches 75% of its adhesiveness after 15 minutes. On a 3 inch diameter neutral paper core and release liner, 7 year durability. Meets or exceeds requirements of federal specification LS-300C, FP-85, and ASTM D4956-94.

JVCC REF-7 Engineering Grade Reflective Tape: 2 in. x 10 yds. (Silver-White)

Page 1 of 59 | next